background image

9

Installation

Washer

approx.

2cm

• 

Level floor :

Allowable slope under entire washer is 1˚.

• 

Power outlet :

Must be within 1.5 meters of either side of location
of washer. Do not overload the outlet with more
than one appliance.

• 

Additional Clearance :

For Wall, 10cm:rear / 2cm : right & left side
Do not place, store or use laundry products on top
of washer at any time. 
They can damage the finish or controls.

Installation place requirements

‹

Positioning

‹

Location

• Install the washer on a flat hard floor.

• Make sure that air circulation around the washer is not impeded by carpets, rugs, etc.

• Never try to correct any unevenness in the floor with pieces of wood, cardboard or similar

materials under the washer. Do not build the machine into a closed cupboard.

• If it is impossible to avoid positioning the washer next to a gas cooker or coal burning

stove,an insulating(85x60cm) covered with aluminum foil on the side facing the cooker or
stove,must be inserted between the two appliance.

• The washer must not be installed in rooms where the temperature can drop below 0°C. 

• Please ensure that when the washer is installed, it is easily accessible for a Service

Technician in the event of a breakdown.

• With the washer installed, adjust all four feet using the transit bolt spanner provided

ensuring the appliance is stable, and a clearance of approximately 20mm is left between
the top of the washer and the underside of any work-top. 

• This equipment is not designed for maritime use or for use in a mobile installations such as

caravans, aircraft etc.

• It is also not intended for commercial or outdoor applications, or washing of items such as

foot ware, mats etc.

Summary of Contents for WD14024D6





































Reviews: