19
ENGLISH
ow to use the washer
Child lock
If you choose to lock the buttons on the
control assembly to prevent tampering, this
function may be selected.
• Child lock can be set by pressing and
holding the
Option
and
Rinse
button
simultaneously. (About three seconds)
•
When child lock is set, all buttons are inoperable.
• To deactivate Child lock system, press and
hold the
Option
and
Rinse
button
simultaneously again. (About three seconds)
• To change to the desired program, whilst in
child lock mode.
1
. Press and hold both
Option
and
Rinse
button together once again.
(About three seconds)
2
. Press the
Start/Pause
button.
3
. Select the desired program and press the
Start/Pause
button again.
• The child lock can be set at any time and it
is automatically canceled when operational
errors occur. Also
Child lock
works when
power is off.
H
Rinse
• By pressing the Rinse
button,the Rinse type can
be selected.
• Used to additional rinse, which may assist
in removing traces of detergent residue.
• By selecting Rinse+ function,
the Rinse time and the Rinse water are
increased.
• Cotton, Cotton-Eco, Synthetic, Baby Care
performs 3 Rinses
• Quick 30, Hand Wash/Wool, Duvet, Delicate,
Cotton Quick performs 2 Rinses.
• Is selected by pressing the Rinse button
repeatedly this function leaves clothes in the
washer; suspended in the water after a rinse
without entering into spin.
• To proceed through to a drain or spin, once
the rinse hold function is completed using to
program dial scroll to the required program.
• For high effectiveness or more purity in rinse
operation you can choose Medic Rinse
option.
The required lamp will light up for identification.
1. Normal
2. Rinse+
3. Rinse Hold
4. Medic Rinse
Change
the desired
program
Summary of Contents for WD-E1212TD
Page 32: ...32 emo M ...