A6
Connecting the Display
2
Using the Computer
1.
Make sure to turn off the computer and product. Connect the cable as below sketch map
form
to
.
Wall-outlet type
PC-outlet type
MAC
Power Cord
1
2
2.
Touch the power button on the front of panel to turn
the power on. When monitor power is turned on, the
'Self Image Setting Function' is executed automatically.
(Only Analog Mode)
NOTE
'Self Image Setting Function'?
This function provides the user with optimal display settings.When the user connects
the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.
'AUTO/SET Function'?
When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen
while using the device or after changing screen resolution, touch the AUTO/SET function button to improve resolution.
NOTE
This is a simplified representation of the
rear view.
This rear view represents a general
model; your display may differ from the
view as shown.
PC
1
PC
Varies according to model.
Signal Cable
A
B
C
Connect D-sub Cable (PC)
Connect D-sub Cable (Mac)
Connect DVI-D Cable
DVI-D(This feature is not
available in all countries.)
Mac adapter
For Apple Macintosh use, a
separate plug adapter is
needed to change the 15 pin
high density (3 row) D-sub
VGA connector on the
supplied cable to a 15 pin 2
row connector.
Power button
Summary of Contents for W2600HS
Page 27: ...Digitally yours ...
Page 28: ...Regulatory information Regulatory information ...