16
INSTALLATION
1
Slide the air conditioner into the case.
Reinstall the 2 screws removed earlier
on each side of the case.
2
Stuff the foam around the unit to prevent air
and insects from getting into the room.
3
Before installing the front grille, pull out the
vent control lever located above the unit
control knobs, as shown. (for some models)
CAUTION
●
The unit is heavy. Use an assistant to help
lift the unit and set it in place. Lifting and
maneuvering the unit by yourself could
result in injury.
Screw
Screw
The Foam
4
Connect the wire harness from the front
grille assembly to the air conditioner.
5
Attach the front grille assembly to the
cabinet by inserting the grille tabs into the
slots on the front of the cabinet. Push the
grille in until it snaps into place.
NOTE
●
Carefully guide the vent control lever
through the grille as you push the grille in.
6
Remove air filter from the front grille by
pulling the filter forward and then up
slightly.
Insert 2 type A screws through the front
grille.
Installations of the unit into
the Cabinet
Summary of Contents for W121CE SL0
Page 24: ...24 MEMO Memo ...
