background image

4

Read and follow all instructions before using your vacuum cleaner to prevent the risk of fire, electric shock, personal injury, or

damage when using the vacuum cleaner. This guide do not cover all possible conditions that may occur. Always contact your

service agent or manufacturer about problems that you do not understand. This appliance complies with the following EC

Directives :-2006/95/EC Low Voltage Directive -2004/108/EC EMC Directive.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “WARNING” or “CAUTION.”

These words mean:

This symbol will alert you to hazards or unsafe practices which could cause serious

bodily harm or death.

This symbol will alert you to hazards or unsafe practices which could

cause bodily injury or property damage.

•  Do not plug in if control knob is not in OFF position.

 

Personal injury or product damage could result.

•  Keep children away and beware of obstructions

 

when rewinding the cord to prevent personal injury

 

The cord moves rapidly when rewinding.

•  Disconnect electrical supply before servicing or

 

cleaning the unit or when cleaner is not in use.

 

Failure to do so could result in electrical shock or 

personal injury.

•  Do not use vacuum cleaner to pick up anything that

 

is burning or smoking such as cigarettes, or hot 

ashes.

 

Doing so could result in death, fire or electrical shock.

•  Do not vacuum flammable or explosive substances

 

such as gasoline, benzene, thinners, propane

 

(liquids or gases).

 

The fumes from these substances can create a fire 

hazard or explosion. Doing so could result in death or 

personal injury.

•  Do not handle plug or vacuum cleaner with wet 

hands.

 

Doing so could result in death or electrical shock.

•  Do not unplug by pulling on cord.

 

Doing so could result in product damage or electrical 

shock. To unplug, grasp the plug, not the cord.

•  Keep hair, loose clothing, fingers, and all parts of 

 

the body away from openings and moving parts.

 

Failure to do so could result in electrical shock or 

personal injury.

•  Do not pull or carry by cord, use cord as a handle,

 

close a door on cord, or pull cord around sharp

 

edges or corners. Do not run vacuum cleaner over

 

cord. Keep cord away from heated surfaces.

 

Failure to do so could result in electrical shock or 

personal injury or fire or product damage.

•  The hose contains electrical wires. Do not use it if it 

is damaged, ccut or punctured.

 

Failure to do so could result in death, or electrical shock.

•  Do not allow to be used as toy. Close attention is

 

necessary when used by or near children.

 

Personal injury or product damage could result.

•  Do not use the vacuum cleaner if the power cord or 

plug is damaged or faulty.

 

Personal injury or product damage could result. In these 

cases, contact LG Electronics Service Agent to avoid 

hazard.

•  Do not use vacuum cleaner if it has been under water.

 

Personal injury or product damage could result. In these 

cases, contact LG Electronics Service Agent to avoid 

hazard.

•  Do not continue to vacuum if any parts appear 

missing or damaged.

 

Personal injury or product damage could result. In these 

cases, contact LG Electronics Service Agent to avoid 

hazard.

•  Do not use an extension cord with this vacuum cleaner.

 

Fire hazard or product damage could result.

•  Using proper voltage.

 

Using improper voltage may result in damage to the 

motor and possible injury to the user. Proper voltage is 

listed on the bottom of vacuum cleaner.

•  Turn off all controls before unplugging.

 

Failure to do so could result in electrical shock or 

personal injury.

•  Do not change the plug in any way.

 

Failure to do so could result in electrical shock or 

personal injury or product damage. Doing so result in 

death. If plug does not fit, contact a qualified electrician to 

install the proper outlet. 

If the supply cord is damaged, it must be replaced by 

the manufacturer, its service agent or similarly qualified 

persons in order to avoid a hazard.

•  Repairs to electrical appliances may only be

 

performed by qualified service engineers.

 

Improper repairs may lead to serious hazards for the user.

•  Do not put fingers near the gear.

 

Failure to do so could result in personal injury.

WARNING

CAUTION

WARNING

IMPORTANT SAFETY INSTRUCTIONS

Summary of Contents for VK7120LHAMY

























Reviews: