LG VC61 NHTY Series, Owner'S Manual

Page: 16 / 19

Check that the vacuum cleaner is plugged in
correctly and that the electrical socket is
working.
Cleaning exhaust filter (18)
• The exhaust filter is a reusable HEPA filter.
• To change the exhaust filter, remove the filter
cover on the body by release hook.
• Pull out the exhaust filter.
• Dust off filter. (Do not wash filter with water)
• The exhaust filter should be cleaned at least
once a year.
• Turn off the vacuum cleaner and unplug it,
• Check the telescopic pipe, flexible hose and
cleaning tool for blockages or obstructions.
• Check that the dust tank is not full. Empty if
necessary.
• Check that the exhaust filter is not clogged.
Clean the exhaust filter if necessary.
• Check that the air filter is not clogged. Clean
the air filter if necessary.
!
!
What to do if your vacuum
cleaner does not work?
What to do when suction
performance decreases?
Crevice tool (14)
Crevice tool is for vacuuming in those normally
hard to reachh places such as reaching cobwebs
or between the cushions of a sofa.
Emptying dust tank
Cleaning the dust " tank" (15)
• Open the tank cap.
• Wash both parts with soft material.
Gently rinse both parts under a cold running tap.
Gently rinse both parts separately under a
cold running tap until the water runs clear.
Do not use detergent or a washing
machine or dishwasher.
Do not push the cover open button when
you carry the vacuum cleaner. If the cover
opens, it is easy to detach the dust tank
from the vacuum cleaner.
Cleaning dust tank (16)
• Open cover with pushing button and pull out
dust tank.
• Raise dust tank cap.
• Dry fully in shade so that moisture is entirely
removed.
If suction power decreases after cleaning
dust tank, clean air filter and motor safety
filter.
Cleaning air filter and motor safety
filter (17)
If suction power is decreased after cleaning dust
tank, clean air filter and motor safety filter.
Air filter and motor safety filter are located at the
center of vacuum cleaner in the above figure.
• Open the air filter cover by pulling the air filter
cover lever and take out air filter.
• Separate the parts.
• Wash air filter and motor safety filter with water.
• Do not wash filters with hot water.
• Dry fully in shade so that moisture is entirely
removed.
!
• Air filter and motor safety filter should be
cleaned in the above case.
If filters are damaged, do not use them.
In this cases, contact LG Electronics
Service Agent.
ENGLISHENGLISH
- 15 -