-8-
BEFORE REQUESTING SERVICE
Proper assembly and safe use of your vacuum cleaner are your personal responsibilities.
Read this "Owner's Manual" carefully for important use and safety information.
TROUBLE SHOUTING CHART
Review this chart to find do-it-yourself solutions for minor performance problems
WARNING
Disconnect electrical supply before servicing and/or cleaning the unit. If not, electric
shock could occur and/or cleaner could suddenly start.
Problem
1. Unplugged at wall outlet.
2. Push switch is not in "ON" position.
3. No voltage in wall outlet.
4. Over-heating projection for the
motor is actived.
1. Full or clogged dust tank or airflow
blockage.
2. Hole in hose
3. Clogged nozzle.
4. Hose is not properly connected to
cleaner.
1. Suction too strong.
1. Plug in firmly; push switch button.
2. Push switch button.
3. Check fuse or breaker.
4. Check dust filter, blockages and
allow the motor to cool down for 2
Hours then switch on.
1. Clean the dust tank or check the
airflow passage.
2. Replace hose.
3. Clean the airflow passage of
nozzle.
4. Ensure hose is properly connected.
1. Regulate power with the knob on
the handle of hose.
Cleaner won't
run.
Cleaner
suction is low.
Cleaner picks
up movable
rugs or nozzle
pushes too
hard.
Possible Solution
Possible Causes
