LG V-net PQNUD1S00, Owner'S Manual, Page: 18 / 31

18 Electricity Distribution Indicator
Press the Shift key to enter the
indoor selection mode
Initial Screen
LGAP
( S t a r t ) - > ( E n d )
( 0 0 ) - > ( 0 0 )
( S t a r t ) - > ( E n d )
( 0 0 ) - > ( 3 F )
( S t a r t ) - > ( E n d )
( 1 2 ) - > ( 1 5 )
• You can select the option for indoor address selection mode only when
Master / Slave is selected.
• You can distribute the using power to maximum of 64 indoor units.
(When showing the stand by power, maximum of 63 indoor units.)
Installation
- If the PDI connects to 64 indoor units, set the addresses of indoor units from 00 to 3F.
(Central control address : 00~3F)
Ex) If addresses of indoor units are set by “12”, “13”, “14” and “15”,
set start address by “12” and set end address by “15”.
- Press the Menu key to save the remote reading service ID and return to the
initial screen.