manualshive.com logo in svg

LG V-Net PQDSBNGCM1, Installation Manual, Page: 2 / 14

Share
Download
LG V-Net PQDSBNGCM1 Installation Manual Download Page 2

2

Dry contact Module for thermostat

Dry contact Module for thermostat Ownerʼs &installation manual

TABLE OF CONTENTS

n

Safety Precautions .............................................................3~4

n

Name of each part ..................................................................5

n

Installation Method .............................................................6~7

Installation inside of the indoor unit..........................................................6

Installation outside of the indoor unit .......................................................7

n

Setting and using method ................................................8~14

1. Power supply and indoor unit connection............................................8

2. Setting of Contact Signal Input ............................................................9

3. Setting of ʻSETTING_SWʼ..................................................................10

4. Setting of ʻTEMP_SWʼ .......................................................................13

5. Indoor unit monitoring ........................................................................14

Summary of Contents for V-Net PQDSBNGCM1















Reviews:

No comments