E
Information for your safety
Please read all the following information,
which contains important instructions for
the safety, use and the maintenance of the
appliance.
This appliance complies with the following EC
Directives: -73/23/EEC, 93/68/EEC-Low
Voltage Directive-89/336EEC -EMC Directive.
Do not use the appliance If the supply cord
is damaged or faulty.
If the main lead is damaged, it must be
replaced by an approved LG Electronics
Service Agent in order to avoid a hazard.
Always switch the vacuum cleaner off
before :
• changing the dust bag.
• changing or cleaning the filters.
If no dustbag is inserted, the cover
cannot be closed. Please do not use
force!
Do not vacuum flammable or explosive
substances(liquids or gases).
Do not vacuum hot ash, embers etc. nor
sharp objects.
Do not vacuum water or other liquids.
How to Use
Connecting the flexible hose
Push the end of the head
(1)
on the flexible
hose
(2)
into the attachment point on the
vacuum cleaner.
To remove the flexible hose from the vacuum
cleaner, press on the button
(3)
situated on the
head, then pull upwards.
Assembling the tubes
(depending on model)
(depending on model)
Suction capacity increases smoothly up to
MAX.
• Plastic or metal tube (4).
- Fit together the two tubes by twisting slightly.
- Air adjustment
(33)
- Cleaning turbine brush nozzle
(34)
- Fit the elbow tube onto the end of the telescopic
tube and the grip handle.
- If you pull the latch
(30)
, the elbow tube can
be bent.
- If you stretch the elbow tube, it is returned to
its position.
• Telescopic tube (5)
- Push spring latch
(6)
forward.
- Pull out tube to required length.
- Release spring latch to lock.
Using the cleaning head and Accessory
Nozzles
(depending on model)
The 2- position head (7)
is equipped with a
pedal
(8)
which allows you to alter its position
according to the type of floor to be cleaned.
•
Hard floor position
(tiles, parquet floors...).
Press on the pedal to lower the brush.
Carpet or rug position.
Press on the pedal
to lift the brush up.
•
Fit the large cleaning head onto the end of
the tube.
•
Hard Floor Nozzle (31)
Efficient cleaning of hard floors (wood,
linoleum,etc.)
Slide the air control lever to the right
for long pile carpet and to the left for
short pile carpet.
Press the button on the rear side of the
nozzle to separate the air cover
.
Use the dusting brush & crevice tool to
vacuum clean the brush and fan
.
•
•
Turbine brush nozzle (32)
•
Elbow tube (29)
The elbow tube is for uses such as cleaning
under the sofa, table and bed easily.
Crevice Tool (9)
For vacuuming in those normally inaccessible
places i.e. reaching cobwebs, or down the
side of a sofa!
•
Dusting brush (10)
For vacuuming picture frames, furniture
outlines, books and other uneven objects.
•
•
•
Upholstery Nozzle (11)
For vacuuming uphostery,mattresses,etc.
How to plug in and use
Adjusting the power level
Electronic power control (16)
Pull out the supply cord to the desired length
and plug into the socket.
Press button
(13)
to start the vacuum cleaner.
To stop it press the button
(13)
again.
The flexible hose handle
(14)
has a manual
air flow regulator
(15)
which allows you to
briefly reduce the suction level.
Never allow children to use the appliance
unsupervised.
When you vacuum with an attachment
appliance that has a rotating brush roller,
do not reach into the running brush roller.
The thread collectors help to pick up the
threads and fluff.
-
4
-
