-7-
CHECKING
CHECK THE POWER
SOURCE
The fuse is melt down in the
coverknife switch.
Exchange the fuse.
Poor plug insertion
Insert again.
Power cord cut Repair or exchange.
Interior lead wire cut
Exchange the lead wire.
Motor(stator, armature) coil
cut or damaged.
Exchange the motor.
Poor contact carbon brush
defaced.
Exchange or repair the motor.
Poor switch contact point
Motor armature cut.
Exchange the motor.
Ball bearing defacement
Exchange the motor.
Impeller hindrance
(Caused by foreign matters)
Remove the foreign matters.
CAUSE
SOLUTION
TROUBLE SHOOTING GUIDE
1. SWITCH ON BUT MOTOR DOSE NOT TURN.
2. SWITCH ON, MOTOR DOES NOT TURN BUT BUZZES.
Exchange the switch.
LGE Internal Use Only
Copyright © 200
7
LG Electronics. Inc. All right reserved.
Only for training and service purposes
Summary of Contents for V-CD281NT
Page 14: ......
