background image

3

3828Fi3861K

Information for Your Safety

Please read all the following information, which contains important instructions for the safety,

the use and the maintenance of the appliance.

This appliance complies with the following EC Directives: -73/23/EEC,

93/68/EEC-Low Voltage Directive-89/336EEC -EMC Directive.

❏ 

Never allow children to use the appliance unsupervised.

Do not use the appliance If the power cord is damaged or faulty.

If the power cord is damaged, it must be replaced by an approved 

LG Electronics Service Agent to avoid a hazard.

Always switch the vacuum cleaner off before:

Emptying the dust chamber.

Cleaning or changing the filters.

Do not vacuum flammable or explosive substances(liquids or gases).

Do not vacuum hot ash, embers etc. nor sharp objects.

❏ 

Do not vacuum water or other liquids.

❏ 

Do not unplug by pulling on cord.

❏ 

Use only LG's recommended filters.

When you vacuum with an attachment appliance that has a rotating brush roller:

Do not reach into the running brush roller.

Do not vacuum fine dust.

❏ 

Do not expose vacuum cleaner to heat. 

Thermal protector

This vacuum cleaner has a special thermostat that protects the cleaner in  

case of motor overheating.  If the cleaner suddenly shuts off, turn off the switch and unplug the 

cleaner. Check the cleaner for a possible source of overheating such as a full dust chamber, a blocked 

hose or clogged filter. If these conditions are found, fix them and wait at least 30 minutes 

before attempting to use the cleaner. After the 30 minutes period, plug the cleaner back in and 

turn on the switch. If the cleaner still does not run, contact a qualified electrician.

Summary of Contents for V-CB951H Series















Reviews: