-5-
DISASSEMBLY
• Almost all the parts of this vacuum cleaner can be
disassembled with a screw driver and each
connecting component easily fits each other.
Disassemble one by one referring to the exploded view.
• If possible, don’t disassemble except for the
necessary parts. It is not necessary to disassemble
the parts that are not detailed in the exploded view.
1. Body Cover Assembly Replacement
1) Remove the dust tank from the set.
2) Remove the four screws fastening the body base.
3) Disassemble the filter cover, widening the both of
filter cover, and then pull out the lead wires from
the push switch.
2. Motor Assembly Replacement
1) Unhook the motor housing cover in the direction
of the arrow.
2) Bring out the motor and disconnect the lead wires
from it.
3. Cord Reel Assembly Replacement
1) Remove the cord reel cover by unfastening the
screw.
2) Lift the cord reel assembly from the body base.
Cord Reel
Assembly
Motor
Assembly
NOTE :
Before attempting to service or adjust any part of the vacuum cleaner, disconnect the electrical
power supply cord from the wall outlet.
