background image

OPERATING INSTRUCTIONS

33

ENGLISH

Please move to 'weekly' by 
repeatedly pressing reservation 
button. 'Weekly' blinks at this time. 

Please move to reservation setup mode by pressing reservation button.

 You can setup two weekly reservations for one day, and up to fourteen 

reservations for a week.
For example, to setup (Tuesday morning 11:30 turned on ~ afternoon 12:30 
turned off), you setup in order below.

2

1

Please select weekly reservation or 
weekly reservation 

ڸڹ

 by using        

          button. 

 You can setup two reservations, 

weekly reservation 1 and weekly 
reservation 2, for a day.

3

Please move to 'date' setup part by 
using           button. If 'date' 
indication blinks, please setup date. 
You can setup date from Monday to 
Sunday.

4

Please move to 'AM/PM' setup part 
of turning on by using           button. 

5

Please move to 'hour' setup part of 
turning on by using           button.
- It is the part to setup the time at 

which air-conditioner is turned on.

6

Please move to 'minute' setup part of turning on by using      button.

8

Please change time by using           button.
- You can setup hour 0~12.

7

If 'minute' indication blinks, please setup 'minute' by using           button 

9

Programming - Weekly Reservation

You can set the daily reservation in weekly unit.
Weekly reservation keeps operating until before you cancel it once you setup.

Summary of Contents for UM30R














































Reviews: