LG UHXM120BA1, Installation Manual

Page: 12 / 48

12
INSTALLATION OF INDOOR, OUTDOOR UNIT
ENGLISH
Preparing work for Installation (ART COOL Type Only)
1
First, push the front panel backward and lift it up to remove the two screws.
2
The moment of lifting the both lower parts of panel front, you can hear sound this panel came
out, In this time panel front is separated
3
After pull down this panel a bit, and separate connecting wire with product.
1
Remove two screws(for fixing cover pipe)
2
Pull up the cover side of desired connecting direction, then
cover side is separated.
3
In case of connecting direction is left or right, path through
the hole of cover side.
1
Remove the rubber stopple of desired direction of drainage.
2
As the following picture, Insert drain hose in the handle of
drain pan, and join drain hose and connecting hose.
Panel Front
Connector
Panel Front
Connector
After removing the pipe hole, cut the burr
for safety.
Pipe hole
rubber cap
Only one
desiring direction
Connecting
part
Adhesive
Drain
hose
NOTE
!
When connecting pipe path through rear
wall, don’t remove the hole.
Open panel front
Remove cover pipe and cover side
Drain hose junction
CAUTION
!