background image

Safety Precautions

Ownerʼs Manual 

3

ENGLISH

Safety Precautions

To prevent injury to the user or other people and property damage, the following instructions must be
followed.

n

Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified
by the following indications.

WARNING

CAUTION

This symbol indicates the possibility of death or serious injury.

This symbol indicates the possibility of injury or damage to properties only.

n

Meanings of symbols used in this manual are as shown below.

Be sure not to do.

Be sure to follow the instruction.

WARNING

n

Installation

Do not use a defective or
underrated circuit breaker. Use
this appliance on a dedicated
circuit.

• There is risk of fire or electric

shock.

For electrical work, contact the
dealer, seller, a qualified
electrician, or an Authorized
Service Center.

• Do not disassemble or repair the

product. There is risk of fire or
electric shock.

Always ground the product.

• There is risk of fire or electric

shock.

Install the panel and the cover
of control box securely.

• There is risk of fire or electric

shock.

Always install a dedicated
circuit and breaker.

• Improper wiring or installation

may cause fire or electric shock

Use the correctly rated breaker
or fuse.

• There is risk of fire or electric

shock.

Do not modify or extend the
power cable.

• There is risk of fire or electric

shock.

Do not install, remove, or re-
install the unit by yourself
(customer).

• There is risk of fire, electric shock,

explosion, or injury.

Be cautious when unpacking
and installing  the product.

• Sharp edges could cause injury.

Be especially careful of the case
edges and the fins on the
condenser and evaporator.

For installation, always contact
the dealer or an Authorized
Service Center.

• There is risk of fire, electric shock,

explosion, or injury.

Do not install the product on a
defective installation stand.

• It may cause injury, accident, or

damage to the product.

Be sure the installation area
does not deteriorate with age.

• If the base collapses, the air

conditioner could fall with it,
causing property damage,
product failure, and personal
injury.

Summary of Contents for UB18H


























Reviews: