manualshive.com logo in svg

LG THERMA V Series, Owner'S Manual, Page: 39 / 59

Share
Download
LG THERMA V Series Owner'S Manual Download Page 39

39

FUNCTION SETTING

ENGLISH

Low Noise Mode Time setting

It is the function to set the start and end time of the outdoor unit’s low noise mode operation.

• In the function setting list, select the Low Noise Mode Time category, and press [OK] button to

move to the detail screen.

- After setting the start time and the end time, press [OK] button to move to the upper level

list.

- If the start time and the current time are the same, it enters the outdoor unit low noise

operation mode, and in the monitoring screen, ‘in outdoor unit low noise operation mode’
message is displayed.

- If the end time and the current time are the same, the outdoor unit low noise operation mode

is cleared.

NOTE

!

Low noise mode time setting function can be set only when the installer setting’s outdoor
unit function M/S setting is set to “Master”.

Low noise mode time setting function is only available in some products.

OK

CAUTION

If the function is not used, please set it to Off.

When you enter the low noise operation, the cooling capacity may be degraded.

!

Summary of Contents for THERMA V Series




























































Reviews:

No comments