background image

26

What is not covered.

Service trips to your home to instruct you on the product.
If the product is connected to any voltage other than that shown on the 
rating plate.
If the fault is caused by accidents, neglects, misuses of Acts of God.
If the fault is caused by reasons except for normal domestic use or use in
accordance with the owner's manual.
If the fault is caused by pests, for example, rats or cockroaches etc..
Noise or vibration that is considered normal,for example, water drain sound,
spin sound or warning beeps.
Correcting the installation for example, leveling the product, 
normal maintenance recommended by the owner's manual.
Removal of foreign objects/substances from the machine including the pump
the filter, for example, grit,nails, bra wires and buttons etc..
Correction of unauthorized repairs.
Incidental or consequential damage to personal property caused by possible
defects with this appliance.
If this product is used for commercial purposes, it is not warranted.
(Example:Public places such as public bathroom, lodging house, training
center, dormitory)

If the product is installed outside the normal service area, any cost of
transporatation involved in the repair of the products, or the replacement of
a defective part, shall be borne by the owner.

W

arranty

W

arranty

Summary of Contents for TD-V700E





























Reviews: