background image

9

Connection

Precaution 

Before connecting, make sure that
ignition switch is set to OFF, and remove
the 

terminal of the battery to avoid

short circuits.

otes

• 

Make correct connections as illustrated
in the connection diagram.

• 

Never use the 

cord of each speaker

in common.

From antenna

From power amplifier’s input
jack ( 2 channel or 4 channel
Optional)

To the wiring of vehicle Colors
of leads

• BLUE/WHITE : 

This lead is for

connection to the power amplifier
(Remote on)

• ORANGE : 

This lead is for connection

to the Phone line.

• YELLOW : 

This lead is for connection

to the Battery (back-up) terminal from
which the power is always supplied.

• BLUE : 

This lead is for connection to

the full automatic power antenna.
Power antenna load to be connected to

the terminal of the control relay switch
for vehicles equipped with a power
antenna.
This lead is not used for vehicles with
manual or semiautomatic antennas.

• PINK : 

This lead is for connection to

the Dimmer line

• RED : 

This lead is for connection to the

terminal from which the power is
supplied when the ignition switch is set
to ACC.

• BLACK : 

This lead is for connection to

the Ground.

Connect the CD changer (optional)

• 

Your car receiver works as control unit
for a CD changer which you can buy, if
not yet done, later.

• 

The suitable cord shown on the
scheme will be provided together with
the CD changer.

2-Speaker Connections

4-Speaker Connections

D

C

B

A

L

FRONT

R

1

2

3

4

s

L

FRONT

REAR

R

L

R

1

2

3

4

5

6

7

8

s

Summary of Contents for TCH-M550





















Reviews: