background image

16

W

ashing Programs

W

ashing Programs

Washing 

Programs

Add

the

laundry

Add

the Detergent

(Normal Wash)

Used for normal loads, this
mode automatically selects the
most appropriate conditions
and completes the sequence
in one operation. The built-in
sensor detects the size of the
load and the ideal wash
power and wash, rinse and
spin times are set accordingly

.

Use this mode when washing
lightly soiled clothes for a short
time. The highly recommended
laundry amount is under 2.0kg.

Use this program to increase
rising performance.
This would include underwear
and baby clothes.
If someone has sensitive skin or
skin trouble,use this program.

POWER

AUTO OFF

START
PAUSE

POWER

1

1

2

5

4

3

2

Select the

QUICK
WASH

program on
the Control
panel.

• Add the appropriate

quantity of Detergent as
indicated by the WATER
LEVEL next to 

WATER DETERGENT.

Or follow the Detergent
manufacturer’s
instructions

• Add the appropriate

quantity of Detergent as
indicated by the
WATER LEVEL next to

WATER DETERGENT.

Or follow the Detergent
manufacturer’s
instructions

Use Jean program when
washing Jeans of different sizes

1

5

3

2

• Select the

JEANS

program on
the Control
panel.

•  Spread

the jean
evenly in
the tub

1

5

3

2

•  Select the

WOOL

program on
the Control
panel.

Use this program for washing
delicate fabrics such as lingerie and
woolens. (wash only “water
washable” clothes)
Before washing your woolens
check the care label for the
washing instructions.
(wash only water washable clothes)

•  Use neutral

Detergent
appropriate for the
laundry.

•  When washing

woolens use a mild
Detergent
recommend- ed for
washing wool.

1

5

3

2

•  Select the

SMART
CLEANING

program on the
Control panel.

Summary of Contents for T9504TEFT0









































Reviews: