11
EN
NOTE
•
After completing connection, if water leaks from
the hose, repeat the same steps. Use the most
conventional type of tap for the water supply. In
case that the tap is square or too big, remove
the guide plate before inserting the tap into the
adaptor.
Installing the Drain Hose
Before connecting the drain hose, check your drain
hose model and choose the correct instruction.
Installing the Drain Hose without
the Elbow Bracket
1
Push the elbow hose toward the body of the
appliance.
2
To change the direction of the hose, pull out
the elbow hose and change the direction.
Repeat Step 1.
Positioning the Drain Hose
•
The length of the drain hose should not exceed
300 cm
. Do not place the drain hose more than
6 cm
above the threshold.
FP
FP
