20
EN
•
When water level is automatically detected, it
may differ depending on the amount of laundry
even though the same water level is indicated
on the control panel.
Process
When you need a
Wash
+
Rinse
+
Spin
,
Spin
only,
Rinse
+
Spin
,
Rinse
only,
Wash
+
Rinse
,
Wash
only
cycle, these can be set manually.
•
Press the
Process
button to select
Wash
,
Rinse
and
Spin
options as desired.
1
Press the
POWER
button.
2
Press the
Process
button until light up.
•
When you select a programme, the LED in
front of each option is light up.
3
Press the
Water Level
button to adjust the
water level according to the amount of laundry.
4
Add laundry into the drum.
5
Press the
START/PAUSE
button to start the
cycle(s).
6
Add the detergent into the detergent dispenser
and close the door.
NOTE
•
When you set a washing cycle manually such
as rinse only, wash only or wash and rinse, the
water will not be drained out after the wash is
completed. If you wish to drain the water, select
a spin only cycle after the wash has completed.
•
If a rinse only cycle is selected, the water
supply is started after detecting the load and
this cycle will start. However this cycle will start
to supply water of the selected water level if
there is already water in the tub.
•
If you do not select or change the
Water Level
,
the water level will be set automatically.
Child Lock
Use this function to disable the controls. This
function can prevent children from changing
programmes or operating this appliance.
NOTE
•
Once this function is set, all buttons are locked
except the
POWER
button.
•
When the controls are locked,
CL
and the
remaining time are alternatively shown on the
display during the wash while the child lock is
engaged.
•
Turning off the power will not reset this
function. You must deactivate this function
before you can access any other options and
functions.
Locking the Control Panel
1
Turn on the power.
2
Press and hold the
Water Level
and
Program
buttons simultaneously for 3 seconds to
activate this function.
Unlocking the Control Panel
1
Turn on the power.
2
Press and hold the
Water Level
and
Program
buttons simultaneously for 3 seconds to
deactivate this function.
•
When this function is deactivated, a beeper
will sound and the remaining time for the
current cycle will reappear on the display.
