31
Install
ation
C
onnecting Drain Hose
NOTE
•
To Prevent siphoning, the drain hose should not extend more than 50 mm from the end of the hose guide
•
The discharge height should be approximately 0.9
∼
1.2 m from the floor.
•
The hanging down drain hose might cause poor drainage.
Before connecting drain hose, check your Drain Hose model and choose the correct instructions.
Pump Model
1
Fit the end of the drain hose to the outlet of the drain pump and tighten the clamp.
2
Put the other end of the drain hose over standpipe or wash tub.
0.9
∼
1.2 m
within 50 mm.
Drain hose
Hose
guide
Non-Pump Model
Connect the Elbow Hose
Push the elbow hose toward the body of the
washing machine.
Place the Drain Hose
To change the direction of the hose, pull out
the elbow hose and change the direction.
Repeat Step 1.
1
2
Summary of Contents for T8566NEDVF
Page 20: ...19 Washing Program Close the lid Finish Caution Note ...
Page 43: ...Memo ...
Page 44: ...Memo ...
Page 45: ......