LG T70CSA13P, Owner'S Manual

Page: 24 / 32

Cleaning the filter in the inlet valve
Cleaning the lint filter
Before cleaning the filter in the inlet valve, completely remove the water remaining in the water hose.
When the water supply is bad, check substances like stone or sand in the filter.
If the filter is clogged with dirt, water cannot flow into the washer. Clean the filter regularly.
1 3
l Turn off the water tap and put on the power
switch.
l
Select cold & hot water and press
START/PAUSE button. Let the washer operate
for 5 seconds
.
Disconnect water hose, and remove filter from
the inlet valve by hand or with tools. Remove
dirt with a tooth brush and clean in water.
2
Switch off the washer and disconnect the power
cord.
l Then insert it back into the water inlet.
l When the lint filter is worn out, etc., contact a LG Service Center for a new one.
1 2 3
Press and then pull forward
the lint filter from the washing
tub to the arrow direction. Turn inside out and wash it to
remove dirt. Insert it back into same
place and push until click
sound heard.
Press & Pull
Push
C
leaning and Maintenance
Care and Maintenance
24