manualshive.com logo in svg

LG T2511VSA, Owner'S Manual

Share
Download
LG T2511VSA Owner'S Manual Download Page 38

38

EN

Symptoms

Reason

Solution

Control error.

 

•

Unplug the washing machine and wait 60 

seconds. Reconnect power and try again. If the 

error code is not released, call for service.

Water level is too high due to 

a faulty water valve.

 

•

Close the water taps, unplug the washing 

machine, and call for service.

The water level sensor is not 

working correctly.

 

•

Close the water taps, unplug the washing 

machine, and call for service.

A motor error has occurred.

 

•

Allow the washing machine to stand for 30 

minutes and then restart the cycle. If the error 

code is not released, call for service.

Clutch error.

 

•

Unplug the washing machine and call for 

service.

Tub Clean Alarm.

 

•

Run the 

Tub Clean

 programme.

Sensor for cloth-sensing is 

defective.

 

•

Manually redistribute the load if articles have 

become tangled.

Motor’s revolution is too low.

 

•

Unplug the washing machine and wait 60 

seconds. Reconnect power and try again.

 

•

Call for service.

Contact-point of Connector is 

defective.

CL

 is not an error. This 

prevents children from 

changing cycles or operating 

the appliance.

 

•

To deactivate, press and hold the 

Beeper

 and 

Rinse

 buttons simultaneously for 3 seconds.

Summary of Contents for T2511VSA









































Reviews:

No comments

Brands by name

Popular brands

Load more brands