12
OSD Adjustment and Selection Items
In the previous section, you were introduced to the procedure of
selecting and adjusting an item using the OSD system. There are two
Main Menu pages: the first one has the 8 most commonly used items,
and the second page has items that are used less frequently. When
selecting an item to be adjusted, moving the adjustment control past
the last icon on the screen (either left or right) will take you to the
other Main Menu page.
Listed below are the icons, icon names, and icon descriptions of the
items that are shown on the Main Menu 1 OSD :
Horizontal Size (To adjust image width)
Horizontal Position (To move picture image left and right)
Vertical Size (To adjust image height)
Vertical Position (To move image up and down)
Side Pincushion (To correct the bowing in and bowing out of the image)
Trapezoid (To correct geometric distortion)
Tilt (To correct image rotation)
Side Pincushion Balance (To correct the balace of both sides bowing)
Listed below are the icons, icon names, and icon descriptions of the
items that are shown on the Main Menu 2 OSD :
Color Select (To select Color Temperature or set color levels)
Zoom Adjust (To Adjust image width and height at same time)
mr
Moire Control (To reduce the interference of the horizontal
display lines or the vertical display lines)
OSD Adjust (To adjust position and size of the OSD)
Option Select (To select options (beep on/off, degauss, BNC/D-Sub,
Video level (0.7V or 1.0V)))
Mode Recall (To recall the stored factory mode)
Mode Info (To review detail about current video mode)
CC
Static Convergence Control (To correct the Misconvergence)
OSD
