13
INSTALLATION
ENGLISH
INSTALLATION
Product Specifications
The appearance and specifications listed in this manual may vary due to constant product improvements.
Oven Range Models
LSSG3017, LSSG3020
Description
Gas Range
Electrical requirements
1 kW 120 VAC
Exterior Dimensions
29
7
/
8
" (W) x 37
59
/
64
" (H) x 28
3
/
4
" (D) (D with door closed)
75.7 cm (W) x 96.2 cm (H) x 73 cm (D) (D with door closed)
Height to cooking surface
36" (91.4 cm)
Net weight
185.6 lb (84.2 kg)
Total capacity
Total cap.: 6.3 cu. ft.
Before Installing the Range
Make sure your range is properly installed and grounded by a qualified installer, according to the installation
instructions. Any adjustment and service should be performed only by qualified gas range installers or service
technicians.
In the Commonwealth of Massachusetts
•
This product must be installed by a licensed plumber or gas fitter.
•
When using ball type gas shut-off valves, they must be the T-handle type.
•
When using a flexible gas connector, it must not exceed 3 feet in length.
Preparing for Installation
Tools Needed
Phillips screwdriver
Open-end or adjustable
wrench
Pencil and ruler
Level
Flat-blade screwdriver
Pipe wrench (2)
(one for support)
Materials You May Need
•
Gas line shut-off valve
•
Pipe joint sealant that resists action of natural and LP gases
•
Flexible metal appliance connector (
3
/
4
" or
1
/
2
" NPT x
1
/
2
" I.D.)
Never use an old connector when installing a new range.
•
Flare union adapter for connection to gas supply line (
3
/
4
" or
1
/
2
" NPT x
1
/
2
" I.D.)
•
Flare union adapter for connection to pressure regulator on range (
1
/
2
" NPT x
1
/
2
" I.D.)
•
Liquid leak detector or soapy water
•
Lag bolt or
1
/
2
" O.D. sleeve anchor (for concrete floors only)
Summary of Contents for Studio LSSG3017 Series
Page 66: ...66 MEMO MEMO ...