24
1. Flow sensor bars light up
Is Lint Filter full?
No
Yes
Yes
Is Duct clogged?
Clean lint filter before every load
Check & clean duct.
2. Flow sensor bars light up and does not disappear.
Make sure that the ductwork is not
crushed or restricted.
Check for blockages and lint build up.
Avoid long runs of ducts or runs
with multiple elbows or bends.
*Control Panel
1. Flow sensor lights up 2 bars even when vents have been clean and even when the vents are off.
This is Normal.
After Flow sensor Recheck Full Next Cycle, Flow sensor is Reset.
(Flow sensor bars will disappear after Dryer has operated two cycle)
2. Is Flow sensor display changed from 4 bars to 2 bar after cleaning the duct.
Ductwork is slightly too long or has too many elbows.
Dryer can be used in this condition.
Displayed and Don’t disappear Bars
or
9-3 Troubleshooting for flow sensor dryer
