ENGLISH
Installing and Using the Product
Please read this manual carefully before operating your set and retain it for future reference.
To view the instructions of advanced features, visit http://www.lg.com or scan QR code and then download
Owner’s Manual. Some of the content in this manual may differ from your product.
A
Sound bar
B
Function LED / Remote Control Receiver
C
Wireless Subwoofer - Install it close to the sound bar.
D
External Device - (Blu-ray player, game console, etc.)
a
Connect the sound bar to your TV via an optical cable.
b
If you are using an external device (ex. Blu-ray player, game console, etc.), connect it to the TV via an HDMI cable.
c
Connect to power in the following order: wireless subwoofer
[
sound bar. Then, turn on the sound bar. When the connection is
automatically established with the sound bar, the LED on the wireless subwoofer will light up green.
d
Using the product with your TV
A
Press the
F
button repeatedly or
OPTICAL
button once until the OPTICAL LED
appears on the function LED.
B
On your TV’s settings, set the output speaker to [Optical] or [External Speaker].
e
Connecting the product to your smartphone via Bluetooth
A
Tap the
Settings
button on your smartphone and select
Bluetooth
. Turn on the
Bluetooth
function. (
Off
>
On
)
B
Press the
F
button repeatedly until the blinking
Bluetooth
LED
appears on the function LED.
C
Find and tap the product on your smartphone. The product appears as “LG SQC1 (XX)”.
D
When the product is connected to your smartphone via
Bluetooth
, the
Bluetooth
LED
turns on.
If you see a red LED on the back of the wireless subwoofer, it means that the sound bar is not connected to the subwoofer. If this is the
case, connect them in the following order.
A
Press the
Power
button on the sound bar to turn it off.
B
Press the
Pairing
button on the back of the disconnected wireless subwoofer. Check if LED blinks green.
-
If you still see a red LED on the back of the wireless subwoofer, press and hold the button on the back of the subwoofer again.
C
Press the
Power
button on the sound bar to turn it on.
D
When the connection is established, you will see a green LED light on the back of the wireless subwoofer.
Keep the sound bar, the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference.
y
Design and specifications are subject to change without notice.
HDMI OUT
OPT.IN
D
B
A
a
b
C
OPTICAL
OUT
HDMI IN
PORT.IN
Replacement of Battery
ENGLISH
Specification
Power consumption
y
Refer to the main label.
y
Networked standby : 0.5 W
AC adapter
y
Model :
A931-230087W-M21
y
Manufacturer : Dongguan Aohai Technology Co.,Ltd.
y
Input : 100 - 240 V ~ 50/60 Hz
y
Output : 23.0 V
0
0.87 A
Dimensions (W x H x D): Approx. 660.0 mm x 56.0 mm x 99.0
mm
Bus Power Supply (USB): 5 V
0
500 mA
Amplifier (Total RMS Output power): 160 W RMS
How to deactivate the wireless network connection(s).
Set up the AUTO POWER ON/OFF function to off and turn off
the unit.
ENGLISH
Declaration of Conformity
Hereby, LG Electronics declares that the radio equipment type
Wireless Sound Bar is in compliance with the relevant statutory
requirements. The full text of the UK declaration of conformity is
available at the following internet address:
http://www.lg.com/global/support/cedoc/cedoc#
For consideration of the user, this device should be installed and
operated with a minimum distance of 20 cm between the device
and the body.
Frequency range
Output power (Max.)
2402 to 2480 MHz
10 dBm
5730 to 5848 MHz
13 dBm
ENGLISH
Declaration of Conformity
Hereby, LG Electronics declares that the radio equipment type
Wireless Sound Bar is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at
the following internet address:
http://www.lg.com/global/support/cedoc/cedoc#
For consideration of the user, this device should be installed and
operated with a minimum distance of 20 cm between the device
and the body.
Frequency range
Output power (Max.)
2402 to 2480 MHz
10 dBm
5730 to 5848 MHz
13 dBm
Symbols
~
Refers to alternating current(AC).
0
Refers to direct current(DC).
Refers to class II equipment.
1
Refers to stand-by.
!
Refers to “ON” (power).
Refers to dangerous voltage.
SQC1.DGBRLLK (Sheet)_SIMPLE_MFL71933309.indd 5-8
2022-10-31 8:48:52
