Owner's Manual 11
Operating Instructions
Wireless Remote Controller (Heat Pump Model)
• Reset (display): When you press the reset button, all the functions shown on the screen of remote
controller (above image), will be visible on the display. But some of these functions are optional for
your product and may not actually function.
Display screen
Control panel
JET
COOL
JET
COOL
*
Some functions may not be supported, depending on the
model.
Control
panel
Display
screen
Description
Fan button :
Air come out from the
indoor unit below to the room without
air temperature change.
Sleep mode auto button*:
Sets the
sleep mode auto operation.
Temperature adjustment buttons:
Adjusts the room temperature when
cooling and heating.
On/Off button:
Turns the power
on/off.
-
-
-
Indoor fan speed button:
Adjusts the
fan speed.
Operation mode selection button*:
Selects the operation mode.
Cooling operation ( ) /
Auto changeover (
) /
Dehumidifying operation ( ) / Heating
operation ( )
Jet cooling*:
cools down the indoor
temperature within a short period of
time.
Air flow direction button:
Adjusts the
air flow direction vertically.
Temperature display button:
Displays
the room temperature. Press
for
5 sec, conversion °C / °F
Timer button:
Sets the current time
and the start / end time.
Navigation and functions button*:
Adjusts the time and sets the special
functions.
: Auto clean / : Operates energy
saving cooling
Set/clear button:
Sets or cancels
functions.
Reset button :
Resets the remote
control settings.
LIGHT button:
Adjusts the brightness
of the indoor unit display.
ENGLISH
Summary of Contents for SP182CN N50
Page 25: ...ESPAÑOL ...
