Operating Instructions
Cooling Operation
Auto Operation or Auto Changeover
Operation Mode
ROOM TEMPERATURE SETTING BUTTONS
Used to select the room temperature.
RESET BUTTON
Used prior to resetting time.
LED LUMINOSITY BUTTON (OPTIONAL)
Used to adjust LED luminosity.
JET COOL BUTTON
Used to start or stop the speed cooling.
The Jet Cool operates fan in super high speed
in cooling mode.
SLEEP MODE AUTO BUTTON
Used to set sleep mode auto operation.
AIR CIRCULATION BUTTON
Used to circulate the room air without cooling or heating.
10
13
7
16
8
2
9
Flip-up door
(opened)
Wireless Remote Controller (Cooling Only Model)
The controls will look like the following.
Healthy Dehumidification Operation
ROOM TEMPERATURE CHECKING BUTTON
Used to check the room temperature.
AUTO CLEAN BUTTON
Used to set auto clean.
AUTO CLEAN
OPERATION MODE SELECTION BUTTON
Used to select the operation mode.
INDOOR FAN SPEED SELECTION BUTTON
Used to select fan speed in four steps low, medium,
high and natural wind.
HORIZONTAL VANE CONTROL BUTTON
Used to set the desired vertical airflow direction.
ON/OFF BUTTON
Used to turn off/on the unit.
TIME SETTING BUTTONS
Used to adjust the time.
ON/OFF TIMER BUTTONS
Used to set the time of starting and stopping operation.
ON
OFF
TIMER SET/CANCEL BUTTON
Used to set and to cancel the timer operation.
SET
CANCEL
2nd F BUTTON
Used prior to using modes printed in blue at the bottom
of buttons.
Signal transmitter
ON
OFF
CANCEL
AUTO CLEAN
SET
1
3
15
4
11
14
5
6
12
Room Air Conditioner
10
To use the functions printed in blue at the bottom of the buttons press 2
nd
F button first and then the required function
button. Pressing the 2
nd
F button activates the blue printed function of the respective button. To cancel the function
press the 2nd F button again else it will automatically cancel if remains idle after 10 seconds.
NOTE
