Operating
56
Oper
ating
3
4. When this unit is successfully connected with
your
Bluetooth
device,
“PAIRED”
[
your device’s name
[
“BT” appears
on the display window.
y
If it is unavailable to display device name
on the unit, “-” will be displayed.
y
To check the connected device’s name,
press
INFO
on the remote control. The
connected
Bluetooth
device’s name is
displayed.
,
Note
5. Listen to music.
To play music in your
Bluetooth
device, refer to
your
Bluetooth
device’s user guide.
According to your
Bluetooth
device’s volume level,
the volume level of
Bluetooth
will be adjusted.
y
When using
Bluetooth
technology, you have
to make a connection between the unit and
the
Bluetooth
device as close as possible and
keep the distance.
However it may not work well in the case
below :
-
There is an obstacle between the unit and
the
Bluetooth
device.
-
There is a device using same frequency
with
Bluetooth
technology such as a
medical equipment, a microwave or a
wireless LAN device.
,
Note
y
This unit supports
Bluetooth
auto pairing.
However it does not operate in the case
below:
-
When you restart this unit.
-
When you disconnect this unit by yourself.
-
When you disconnect this unit on the
connected
Bluetooth
device.
y
The sound may be interrupted when the
connection is interfered with by the some
other electronic wave.
y
You cannot control the
Bluetooth
device with
this unit.
y
Pairing is limited to “One”
Bluetooth
device.
Multi-Pairing is not supported.
y
Depending on the type of the device, you may
not be able to use the
Bluetooth
function.
y
You can enjoy using
Bluetooth
when using
Phone, MP3, Notebook, etc..
y
The more distance between the unit and the
Bluetooth
device, the lower the sound quality
becomes.
y
The
Bluetooth
connection will be
disconnected when the unit is turned off or
the
Bluetooth
device gets too far from the
unit.
y
If the
Bluetooth
connection is disconnected,
connect the
Bluetooth
device again.
y
When a
Bluetooth
device is not connected,
“BT READY” appears on the display window.
y
If you set the WI-FI function in the state
of unconnected network,
Bluetooth
and Wireless TV Sound Sync may not be
connected.
y
If you change to another function after
connecting
Bluetooth
device,
Bluetooth
connection will be disconnected. And you
return to
Bluetooth
function,
Bluetooth
connection will be connected automatically.
,
Note
Summary of Contents for SJ8S
Page 73: ......
