17
Listening to the radio - more you can do
Looking for radio stations automatically
Press and hold
TUN.-
/
TUN.+
for more than a second. The tuner will scan
automatically and stop when it finds a radio station.
Deleting all the saved stations
Press and hold
PROG./MEMO
. for two seconds. ERASE ALL will flash up on
the DVD receiver display. Press
PROG./MEMO
. to erase all saved radio
stations.
Improving poor FM reception
Press
PLAY (
B
B
) (MONO/ST)
on the remote control. This will change the tuner
from stereo to mono and usually improve the reception.
Seeing information about a radio station
The FM tuner is supplied with the RDS (Radio Data System) facility. This shows
information about the radio station being listened to. Press RDS repeatedly to cycle
through the various data types. :
PS
(Programme Service Name)
The name of the channel will appear in the display
PTY
(Programme Type Recognition)
The programme type (e.g. Jazz or News) will appear in the display.
RT
(Radio Text)
A text message contains special information from the broadcast station.
This text may scroll across the display.
CT
(Time controlled by the channel)
This shows the time and date as broadcast by the station.
Listening to the radio
1 Turn the power on :
POWER
2 Select either FM or AM :
FUNCTION
3 Select a radio station :
TUN-/+
4 To ‘save’ a radio station :
A preset number will show in the display.
PROG/MEMO.
5 Select the preset number :
Up to 50 radio stations can be saved.
PRESET
U
U u
u
6 To confirm press :
PROG/MEMO.
7 To select a ‘saved’ station input the preset
number :
PRESET
U
U u
u
Be sure that both FM and AM aerials are connected.
ON REMOTE
5.1ch ez Set-up
1 Connect
the unit’s OPTICAL IN jack to jack on
optical out of your TV (or Digital Device etc.)
.
:
-
2 Select the AUX OPT:
To select the AUX OPT directly
TV
t
t
HT SPK
3 Listen sound with 5.1ch speaker.:
-
4 To escape from AUX OPT:
TV
t
t
HT SPK
Listen to sound from TV, DVD and Digital Device with 5.1ch mode.
Even in power off mode, if you press TV
t
HT SPK, then power is on and
automatically changed to AUX OPT mode.
ON REMOTE
HW964_event 12/6/08 11:01 AM Page 17
