background image

16 Room Air Conditioner

Maintenance and Service

Indoor Unit

Before performing any maintenance, turn off the main power to the system, disconnect the circuit breaker and 
unplug the power cord.

Clean the unit with a soft dry cloth. Do not use bleach or abrasives.

Never use any of these 
• Water hotter than 40°C. It may cause deformation and discoloration.
• Volatile substances. They may damage the surface of the air conditioner.

Air Filters

The air filters behind the front panel / grill should be checked and
cleaned once in every 2 weeks or more often if necessary. To
remove the filters see the self explanatory diagrams for each
model type. Clean the filters with a vacuum cleaner or warm
soapy water. If dirt is not easily removed, wash with a solution of
detergent in lukewarm water. Dry well in shade after washing and
reinstall the filters back in place.

Allergy Free Triple Filter

Remove the Allergy Free Triple Filter behind the air filter
and expose them in direct sunlight for 2 hours. 
And then insert these filters into original position.

Maintenance and Service

Gasoline

Powder

Removal of Filters

Open the front panel as shown.
Then pull the filter tab slightly forward to remove the air filter.
After removing the air filter remove the Allergy Free and Triple filter by slightly pulling forward.

Allergy filter

Triple filter

Summary of Contents for S09AF




















Reviews: