manualshive.com logo in svg

LG RV1329A1S, Original Owner'S Manual, Page: 17 / 28

Share
Download
LG RV1329A1S Original Owner'S Manual Download Page 17

17

PROGRAMMING MODE - Setup Mode

PROGRAMMING MODE - Setup Mode

Setup Mode : 

 (display)

You can change dryer vend price, cycle time, and cycle parameters, etc.

Entering set up mode

• OPL Type – Push “WHITES&COLORS” + “DELICATES” and the ‘3’.

• Then, dryer displays

 

.

1.  Beep volume

Entering set up 

mode.

You will see LqC1

Button

Display

Press the 

WhITES & COLORS

 button.

Press the 

PERM. PRESS

 or the 

DELICATES

button until 

 appears in the display.

Press the 

START

 button.

Press the 

PERM. PRESS

 or the 

DELICATES

button until 

 appears in the display.

Press the 

START

 button.

Display previous value.

Press 

PERM. PRESS(+)

 or 

DELICATES(-)

 button to select

High or Low or Off.

Press the 

START

 button.

The machine sets up the beep volume, then advances to the
next process automatically.

1. Continue to set up the next mode.

2.  Stop the change of setup value and go back to ready mode. 

• OPL type - Push the WHITES&COLORS button twice. 

MFL62512892_120802.indd   17

2012.8.2   5:47:39 PM

Summary of Contents for RV1329A1S





























Reviews:

No comments