- 8 -
ADJUSTMENT INSTRUCTIONS
1. Application Object
These instructions apply to the RF-043A Chassis.
2. Specification
(1) Because this is not a hot chassis, it is not necessary to
25±5°C of temperature and 65±10% of relative humidity if
there is no specific designation.
(4) The input voltage of the receiver must keep 100~220V,
(5) The receiver must be operated for about 15 minutes prior
O
After RGB Full white HEAT-RUN Mode, the receiver must
be operated prior to adjustment.
O
1) Press the POWER ON KEY on R/C for adjustment.
2) OSD display and screen display 100% full WHITE
[
Set is activated HEAT-RUN without signal generator in
[
Single color pattern(RED/BLUE/GREEN) of HEAT-RUN
Caution) If you turn on a still screen more than 20 minutes
(1) Install the LGIDS. (idsinst.exe)
After installation has completed, check if the file shown in
(Fig. 1) has been created.
(2) Right click on 'LGIDS' and select ‘Create Shortcut’
Then move the shortcut icon onto the desktop.
(3) Double-click on the ‘LGIDS’ icon on the desktop to
execute the program.
(4) After connecting RS-232C cable, turn on the power.
When the TV SET is not assembled completely and only
the PCB is supplied by Stand-by 5V, download at the
Stand-by state (LED is Red).
(5) Select proper CH_memory file(*.nvm) for each model at
Next, select proper binary file(*.bin) including the CH
information for each model at [NVRAM File].
(6) Click the [Download] button.
(7) If you want to check whether the CH information is
memorized correctly or not, click the [Verify] button.
And then compare NVRAM File(*.bin) with the CH
information downloaded.
(Fig. 1)
Summary of Contents for RU-50PZ61
Page 36: ...h t t p w w w w j e l n e t ...
Page 37: ...h t t p w w w w j e l n e t ...
Page 38: ...h t t p w w w w j e l n e t ...
Page 39: ...h t t p w w w w j e l n e t ...