LG RU-44SZ80L - - 44" Rear Projection TV Page 6 Owner'S Manual Download

Page: 6 / 60

P A G E 6

Function Status Indicators

Lamp indicator, operation indicator, and temperature indicator located below the front panel controls,

reveal the operating status of the LCD projection TV.

Operation Indicator

Lamp Indicator

Temperature Indicator

Off

Power cord is not connected.

Red

Power Cord is connected, TV is in standby mode.

Green TV

turns

on.

Orange (flashing)

Preparing operation in standby mode.

Orange

Projection lamp is reaching the end of its life and needs to

be replaced with a new lamp.

Red (flashing)

There is a problem with the lamp or around it. Contact an

authorized service center.

Green (flashing)

The lamp cover is not closed.

Orange

The projection TV is overheating.

Red

The projection TV shut down due to overheating.

Red (flashing)

The projection TV shut down, check the cooling fan.

Operation Indicator

Lamp Indicator

Temperature Indicator

Summary of Contents for RU-44SZ80L - - 44" Rear Projection TV





























































Search results

Summary of Contents for RU-44SZ80L - - 44" Rear Projection TV

Reviews:

Related manuals for RU-44SZ80L - - 44" Rear Projection TV

Brands by name

Popular brands

LG RU-44SZ80L - - 44" Rear Projection TV, Owner'S Manual

Search results

Summary of Contents for RU-44SZ80L - - 44" Rear Projection TV

Reviews:

Related manuals for RU-44SZ80L - - 44" Rear Projection TV

Brands by name

Popular brands