LG RN1329AD1S Owner'S Manual Download Page 16

Page: 16 / 52

PROGRAMMING MODE

PROGRAMMING MODE

1. Programming mode

You can check machine information or change setting on Program setup or Diagnostic test.

There are two methods that you can enter programming mode.

■

how to enter “Programming mode”

You can enter programming mode only for Idle state

and pause state.

- Card Type

1) Insert service card.
2) Display will show

- Coin Type

1) Dissemble upper coin box key.
2) Take out the coin drop from the coin box.
3) Turn on/off the toggle switch at the back of the coin

box.

4) Display will show “

”.

- OPL/Coin Type

1) Push the High Temp. and Low Temp. button at the

same time.

2) Push the Med Temp. button 3 times.
3) Push the Start button.
4) Display will show “

”

■

how to use button

You can change Dryer vend price, cycle time and Cycle

parameters, etc.

Press button

description

High Temp.

Move to upper level

Med Temp.

Move to the mode in the

same level (+)

Low Temp.

Move to the modes in the

same level (-)

No Heat

Start

Enter the selected mode

• If you turn on the power without connecting the meter case for the first time, the machine will display

• When the machine comes from the factory, it is set in the coin type. You can change Card/Coin type by button.

(For more information refer to SETUP mode’s

• The machine will display “PUSH” for OPL type

NOTE

Coin Box Key

Coin Vault

Coin type

Insert debit card

Card type

OPL type

MFL62512875_150414.indd 16

2015.4.14 9:43:36 AM

Summary of Contents for RN1329AD1S





















































Search results

Summary of Contents for RN1329AD1S

Reviews:

Related manuals for RN1329AD1S

Brands by name

Popular brands

LG RN1329AD1S, Owner'S Manual

Search results

Summary of Contents for RN1329AD1S

Reviews:

Related manuals for RN1329AD1S

Brands by name

Popular brands