- 6 -
1. Application range
This specification is applied to ML-041B chassis.
2. Requirement for Test
Testing for standard of each part must be followed in below
condition.
(1) Temperature: 25°C ± 2°C
(2) Humidity: 65% ± 10%
(3) Power: Standard input voltage (AC 100-240V, 50/60Hz)
(4) Measurement must be performed after heat-run more than
30min.
(5) Adjusting standard for this chassis is followed a special
standard.
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement.
3.General Specification
1
2
3
Maker
Type
ActiveDisplay Area
Pixel Pitch [mm]
Electrical Interface
Color Depth
Size [mm]
Surface Treatment
Operating Mode
Back light Unit
R/T
Typ.
Maker
Type
ActiveDisplay Area
Pixel Pitch [mm]
Electrical Interface
Color Depth
Size [mm]
Surface Treatment
Operating Mode
Back light Unit
R/T
Typ.
Maker
Type
ActiveDisplay Area
Pixel Pitch [mm]
Electrical Interface
Color Depth
Size [mm]
Surface Treatment
Operating Mode
Back light Unit
R/T
Typ.
LPL
TFT Color LCD Module
15.0 inches(380.16mm) diagonal(Aspect 4:3)
0.297mm(H)x0.297mm(V)xRGB
LVDS
6BIT WITH FRC, 16,777,216 colors
332.8(H)x262.2(V)x18(D)
Anti Glare(HAZE 3%), Hard Coating(3H)
Normally Black,
4 CCFL(4 lamps)
R.T.:10ms + F.T.:22ms (MAX)
HYDIS
TFT Color LCD Module
15.0 inches(380.16mm) diagona
0.297mm(H)x0.297mm(V)xRGB
LVDS
RGB 6-BIT 16,194,277Colors
331.6(H)x254.7(V)x12.7(D)
HAZE25,Hard Coating,
ANTI- Glare (3H)
Normally Black
4 CCFL(4 lamps)
T total(Tr+Td) = 25ms
CMO
TFT Color LCD Module
15.0 inches(380.16mm) diagona
0.304.1mm(H)x228.1mm(V)xRGB
LVDS
RGB 6-BIT 16,194,277Colors
331.6(H)x254.6(V)x13(D)
Hard Coating, ANTI- Glare (3H)
Normally WHITE
4 CCFL(4 lamps)
R.T.:22ms + F.T.:38ms (MAX)
Item
Specification
Remark
No.
LPL
HYDIS
CMO
