LG RH265 Service Manual Download Page 7

Page: 7 / 57

1-6

Only for training and service purposes

LGE Internal Use Only

SERVICE INFORMATION FOR EEPROM IC SETTING

1. Press the CLEAR button on the remote control together with

OPEN the Front Panel about 6 seconds.

The picture on OSD will be bellow :

2. To MOVE from OP! to another option, Please

button on the remote control.

3. To CHANGE the option code, Please

button on the remote control.

4. To APPLY the option code, after change the option press ENTER button on remote control.

5. To INITIALIZE the system, press CLEAR button on the remote control together with OPEN on the front panel

about 2 seconds.

7. To exit from the option code menu without initializing the system, just turn off the power and then turn on

again.

MODEL :

RH265/

RH266 Disc Read Time

DVD 018 Sec OK
CD 021 Sec NG

OP1 :

00000000 M : 10, D13

OP2 :

00000000 E : FF (OR)

OP3 :

00000000

OP4 :

00000000

OP5 :

00000000

OP6 :

00000000

OP7 :

00000000 W r i t e : OK

OP8 :

00000000 E X I T : MP

OP9 :

00000000 MOVE : < >

OPA :

00000000 E D I T :

Summary of Contents for RH265


































Search results

Summary of Contents for RH265

Reviews:

LG RH265, Service Manual, Page: 7 / 57

Search results

Summary of Contents for RH265

Reviews: