LG RF-17FB70 Series, Owner'S Manual

Page: 27 / 28

Connection of external equipment
Euro scart socket (option)
1. Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
2. Press the PLAY button on the VCR.
If your VCR outputs a switching voltage when connected to a
Euro scart socket, the set will switch to
AV mode automatically.
But if you want to keep on watching TV mode, press the D
/
E
or NUMBER buttons.
Otherwise press the TV/AV button on the remote control hand-
set to select AV . The VCR playback picture appears on the
screen.
You can also record programmes received by the TV on video
tape.
Note : If you want to watch the signals from the input jacks on the
front/side panel, disconnect the Euro scart socket of the VCR from
the Euro scart socket on the back of the set.
Component in sockets (option)
1. Connect the COMPONENT video output sockets (Y Cb Cr, Y
Pb Pr or Y B-Y R-Y) of the COMPONENT (480i) to the COM-
PONENT DVD INPUT sockets (Y P
B
P
R
) on the set.
2. Connect the audio cable from the COMPONENT to COMPO-
NENT AUDIO sockets on the set.
3. Press the TV/AV button to select COMPONENT .
4. Press the PLAY button on the COMPONENT.
The COMPONENT playback picture appears on the screen.
Headphone socket (option)
Only models which have a headphone socket can perform this
function.
Insert the headphone plug to the headphone socket of the set.
You can listen to the sound through the headphones. To adjust the
headphone volume, press the
F
/
G
button.
If you press the MUTE button, the sound from the headphone’s is
switched off.
27
COMPONENT
ANT IN
75 Ω
L L
OUT
DVD INPUT (480i) COMPONENT
IN
Y P B P R
R
L
AUDIO VIDEO (L) -AUDIO-(R)
MENU OK VOL PR
VCR
ANT IN
75
Ω
L L
0455Ken-05/05/24 5/24/94 4:31 PM Page 27