LG RE28FZ10RX Owner'S Manual Download Page 3

Installation

Power

This set operates on an AC mains supply, the voltage is as indicat-
ed on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms or powercuts, please pull out the aer-
ial and mains plugs.

Warning

To prevent fire or shock hazard, do not expose the set to rain or
moisture.

Wiring (in U.K. only)

This set is supplied with a BS 1363 approved 13 amp mains plug,
fused at 5 amp. When replacing the fuse always use a 5 amp BS
1362, BSI or ASTA approved type. Never use this plug with the fuse
cover omitted. To obtain a replacement fuse cover contact your
dealer or “LG Electronics U.K. Ltd.”

If the type of plug supplied is not suitable for the mains sockets in
your home, then the plug should be removed and a suitable type fit-
ted. Please refer to the wiring instructions below:

Warning (in U.K. only)

A mains plug removed from the mains lead of this set must be
destroyed. A mains plug with bared wires is hazardous if inserted in
a mains socket.

Do not connect either wire to the earth pin, marked with the letter E
or with the earth symbol       or coloured green or green and yellow.

If any other plug is fitted, use a 5 amp fuse, either in the plug, or at
the distribution board.

Important (in U.K. only)

The wires in this mains lead are coloured in accordance with the fol-
lowing codes:

BLUE:     NEUTRAL
BROWN: LIVE

As the colours of the wires in the mains lead of this set may not cor-
respond with the coloured marking identifying the terminals in your
plug, proceed as follows:

The wire which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black. The wire which
is coloured brown must be connected to the terminal which is
marked with the letter L or coloured red.

Service

Never remove the back cover of the set as this can expose you to
very high voltage and other hazards. If the set does not operate
properly, unplug it and call your dealer.

Aerial

Connect the aerial cable to the socket marked 

+

75

on the back

cover. For the best reception an outdoor aerial should be used.

Location

Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any

unnecessary vibration, moisture, dust or heat. Also ensure that the
set is placed in a position to allow a free flow of air. Do not cover
the ventilation openings on the back cover.

3

Summary of Contents for RE28FZ10RX





























Reviews: