8
Installation Instructions
Earthing Instructions
This appliance must be earthed. In the
event of malfunction or breakdown, earthing
will reduce the risk of electric shock by
providing a path of least resistance for the
electric current.
This appliance is equipped with an earthed
cord and an earthing plug. The plug must be
plugged into an appropriate outlet that is
properly installed and earthed in
accordance with local standards.
Additional Grounding Procedure
Some countries may require a separate
ground. In such cases, the required
accessory ground wire, clamp and screw
must be purchased separately.
Wall
30cm~50cm
Condensed Water Drain
This appliance can be plumbed directly into
the mains waste with the adaptor supplied.
Condensed water will drain away. A
plumber will be required.
NOTE
- For better drying performance,
please keep the rear of product
away from the walls.
- Do not install the dryer where there
is a risk of frost or dust.
• The tumble dryer may not be able
to operate properly or may be
damaged by freezing of condensed
water in the pump and drain hose.
WARNING
The dryer should not be installed next to
a refrigeration appliance.
Do not install the dryer next to a
high-temperature appliance, such as
a refrigerator, oven or stove etc,
which can affect drying performance
and duration.
The dryer works best at a room
temperature of 23°C.
WARNING
Avoid installing the product around a
heat source.
The warm air venting from the rear side
of the dryer must be well ventilated.
If not, this can bring on problems.
