background image

Safety Instructions

3

S  

afety Instructions

To help reduce any risk of electric shock, fire, or other personal injury or property damage
when using your dryer, please follow basic safety instructions.

WARNING

Serious injury or death may occur when not observing the following rules.

Hazards

• Before plugging power cord,

make sure cord is earthed
and connected to circuit
breaker.

No Earthing may cause
breakdowns or an electric
shock.

• Do not plug into an adaptor. Do

not use with an extension lead.

Abnormal heating of outlet
may cause a fire.

• Do not remove the top plate

when installing the dryer.

• Do not modify this product.

May cause breakdown, fire or
electric shock

• Keep the dryer away from

cookers, naked flames, or any
other inflammable objects.

May cause parts to melt or fire

• Do not use a damaged power

cord or place heavy objects
on the cord.

A damaged power cord may
cause fire or electric shock

• Do not touch the plug or

switch on with wet hands

May cause electric shock

• Disconnect the power cord by

grasping the plug, not the
cord.

May cause wires to loosen
resulting in fire

• Wipe dirt and stains from the

power cord and insert firmly
into the socket

Dirt and poor connections
may cause fire

Summary of Contents for RC7064A1Z





























Reviews: