25
EN
Using Dryer Cycle
Remote Start
w
Use a smart phone to control your appliance
remotely. You can also monitor your cycle
operation so you know how much time is left in the
cycle.
To Use Remote Start:
1
Press the
Power
button.
2
Put the laundry in drum.
3
Press and hold the
Buzzer
button for 3
seconds to enable the Remote Start function.
4
Start a cycle from the LG SmartThinQ
application on your smart phone.
NOTE
•
Once the Remote Start mode is enabled, you
can start a cycle from the LG SmartThinQ
smartphone application. If the cycle is not
started, the machine will wait to start the
cycle until it is turned off remotely from the
application or the Remote Start mode is
disabled.
•
If the door is open, Remote Start is disabled.
To Disable Remote Start:
When Remote Start is activated, press and hold
the
Buzzer
button for 3 seconds.
Download Cycle
Download new and special cycles that are not
included in the basic cycles on the appliance.
Appliances that have been successfully registered
can download a variety of specialty cycles specific
to the appliance.
Only one cycle can be stored on the appliance at
a time.
Once cycle download is completed in the
appliance, the product keeps the downloaded
cycle until a new cycle is downloaded.
Open Source Software Notice
Information
To obtain the source code under GPL, LGPL, MPL,
and other open source licenses, that is contained
in this product, please visit http://opensource.lge.
com.
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code
to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of
media, shipping, and handling) upon email request
to [email protected]. This offer is valid for a
period of three years after our last shipment of this
product. This offer is valid to anyone in receipt of
this information.
Smart Diagnosis™ Using a Smart
Phone
•
For appliances with the
c
or
d
logo
Use this function if you need an accurate diagnosis
by an LG Electronics customer information centre
when the appliance malfunctions or fails.
Smart Diagnosis™ can not be activated unless the
appliance is connected to power. If the appliance
is unable to turn on, then troubleshooting must be
done without using Smart Diagnosis™.
Summary of Contents for RC09VHP2V
Page 35: ...Memo ...
Page 36: ......
