LG R09AWN-NB9, Owner'S Manual

Page: 17 / 27

Owner's Manual 17
Operating Instructions
Moisture Cooling Operation (Optional)
The moisture cooling operation is to prevent the room from
excessive dryness by logic control so that the room humidity
is kept up.
• Push the JET COOL/MOISTURE COOLING BUTTON twice to activate
Moisture Cooling Operation.
• Push the button again, then the mode goes to cooling mode.
• Moisture Cooling may not be activated at high temperature.
• Moisture cooling may not be activated during heating.
• Fan Speed Selection button is not activated during Moisture Cooling operation.
• It prevents excessive dryness, but doesn't moisturize.
NOTE
Jet Cool/Heat Operation
Jet cool function can be used to cool the room quickly in hot summer. When this
function is turned on, the air conditioner runs in cooling operation mode with super
high fan speed and 18°C setting temperature for 30 minutes for fast and effective
cooling.
Similarly, jet heat function (available only in some models) warms up the room quickly
by operating at super high fan speed and 30°C setting temperature for 30 minutes.
You can activate this operation by pressing the JET COOL BUTTON.
To change from jet cool mode to high fan speed cooling mode, press the JET COOL BUTTON or
INIDOOR FAN SPEED SELECTOR BUTTON or the ROOM TERPERATURE SETTING BUTTON again.
• Jet Cool/Heat operation cannot be activated during Air Circulation operation and auto changeover
operation.
• In case of Cooling only model , Jet Cool cannot be activated during Heating.
• In case of Inverter you can use jet heat function by pressing JET COOL BUTTON for heating operation.
• Each time the JET COOL / MOISTURE COOLING BUTTON is pressed, the operation mode is shifted in
the direction of the arrow.
- Cooling
Jet cool
→
Moisture cooling operation
→
cooling
- Heating
Jet heat
→
heating
NOTE