B
EFORE USE
9
ENGLISH
How to insert the Batteries
1
Remove the battery cover by pulling it ac-
cording to the arrow direction.
2
Insert new batteries making sure that the
(+) and (-) of battery are installed correctly.
3
Reattach the cover by sliding it back into
position.
Wireless Remote Controller
Maintenance
1
Choose a suitable place where its safe &
easy to reach.
2
Fix the holder to wall etc with the supplied
screws firmly.
3
Slide the remote controller inside the
holder.
1
The signal receiver is inside the unit.
2
Aim the remote controller towards the unit
to operate it. There should not be any
blockage in between.
NOTE
!
• Always use/replace both batteries of
same type.
• If the system is not to be used for a long
time, remove the batteries to save their
working life.
• If the display screen of remote controller
starts, fading replace both of the batter-
ies.
• Use 2 AAA(1.5 volt) batteries.
NOTE
!
• Remote controller should never be ex-
posed to direct sunlight.
• Signal transmitter & receiver should al-
ways be clean for proper communica-
tion. Use a soft cloth to clean them.
• In case some other appliances also get
operated with remote control, change
their position or consult your service-
man.
Operating method
Summary of Contents for R09AWN-NB11
Page 23: ......