17
206-4354
First Use Wizard (Cont.)
Initiate Configuration or Exit the First Use Wizard
The Welcome screen provides a brief introduction to the First Use Wizard.
Note:
The Welcome screen is allotted a time frame of 10 seconds, after which the Solution
Settings / EZ-Manager Wizard proceeds without user interaction. If a Pro:Centric server is
configured on the system/network and if no location-specific settings are required in the TV,
for example, TV Zone, Wi-Fi Zone, Label, and/or Room Number settings, from this point, the
EZ-Manager Wizard can proceed through each of the configuration steps with no further user
interaction.
This wizard will continue automatically in 10 seconds.
EXIT
START
WELCOME TO LG’S FIRST USE WIZARD
Select the desired option, and then select START to continue.
Basic Settings
Quick settings for basic use (language, network, portal, voice service,...
Solution Settings
Use the EZ-Manager Wizard to configure the TV for Pro:Centric operation.
IP Environment Settings
Access the IP Environment Menu.
Use the arrow keys on the Installer Remote to select the desired option in the Welcome screen:
• To proceed with the Basic Settings Wizard, select/highlight
Basic Settings
, and then press
OK
.
Then, select
START
and press
OK
to continue. See “Basic Settings Wizard” on pages 18 to 22
for further information.
• To proceed with the EZ-Manager Wizard, select/highlight
Solution Settings
, and then press
OK
. Then, select
START
and press
OK
to continue. See “Solution Settings / EZ-Manager Wizard”
on pages 23 to 33 for further information.
• To access the IP Environment Menu, select/highlight
IP Environment Settings
, and then press
OK
. Then, select
START
and press
OK
to continue. See “IP Environment Setup” on pages 65
to 77 for further information.
• To exit the First Use Wizard, select/highlight the
EXIT
button at the bottom of the screen, and
then press
OK
. In the exit confirmation screen, select
EXIT
, and then press
OK
once more on
the Installer Remote.
Note:
If you exit the First Use Wizard from the Welcome screen, no configuration will be performed
and all Installer Menu items will retain their default values, including Installer Menu item 119
DATA CHANNEL. The default DATA CHANNEL setting (255) means that the Pro:Centric remote
management feature on this TV will be activated if a Pro:Centric server is installed and the Data
Channel value is set during a Data Channel Auto Search (see item 119 description on page 47
for additional information). If you actually would like to disable the Pro:Centric feature, both the
EZ-Manager Wizard and the IP Environment Menu provide an option to do so, and/or you may
disable Pro:Centric by modifying the value of Installer Menu item 119.
