Necessary function before using
Owner’s & Installation Manual 9
ENGLISH
Out door
Room Temp
Total on
Central Run
Defrost
Preheat
PQRCFCS0
FAN
SPEED
ROOM
TEMP
1
If you want to set the address on the temperature
display, press the two temperature control buttons
(
▲
/
▼
) at the same time for three seconds.
2
Press the temperature-decreasing button to change
the group number. Press the temperature-increasing
button to change the indoor unit number.
EX) Group Address: 2
Indoor Unit Number: 3
3
Set the address by pressing the two temperature
control buttons (
▲
/
▼
) at the same time for three
seconds.
• Multi-Model: Connect the outdoor unit with PI485 for the outdoor unit
• Single-Model: Connect the indoor unit with PI485 for the indoor unit
• If you connect the indoor unit to the central controller, you should set the network
address of the indoor unit so that the central controller could recognize it.
• The center-control address is composed of the group number and the indoor-unit
number.
Setting the Central-Control Address
Please set the address when using the central controller.
You don't need to set address If you don't use central controller.
