Setting and using method
Owner’s & installation manual
11
4. Control mode setting
■
Use the CONTROL_MODE_SW to set the control mode you
want from 0~D.
■
Description of each control mode
1) Cancel mode for use of dry contact for communication
➲
Set this when the Dry contact for communication is connected but not used.
➲
Indoor control priority
Central control > Dry contact for communication > Wired/Wireless remote controller, indoor unit
button
➲
Dry contact for communication controls the indoor unit according to the applicable mode when there
is a change in input of A and B.
CONTROL_MODE_SW
Input A
Input B
Operating mode
OFF
OFF
ON
OFF
OFF
ON
ON
ON
The indoor unit cannot be controlled through the
Dry contact for communication
No change in indoor unit condition
CONTROL_
MODE S/W
0
